Yamaha SXV70SJ Supplementary Service Manual - Spec
9-26
SPEC
D
Connectors of the gear position
switch (VX700DX/VT700)
E
Route the main switch wire
harness under the oil tank
breather hose and fuel tank
breather hose.
F
Install the main switch coupler
behind the instrument panel.
G
Make sure that the main switch
wire harness is on the inside of
the instrument panel screw (away
from the engine).
H
Route the parking brake cable
under the oil tank breather hose.
I
Make sure that the brake hose
passes over the oil pump and
throttle cables and through the
right side of the hose guide.
J
Oil pump cable (VX700/
VX700DX/VT700)
K
Throttle cable (VX700/VX700DX/
VT700)
L
Oil level switch
M
Variable resistor couplers
N
Fuse box (VX700DX/VT700)
O
Route the oil pump and throttle
cables in the groove of the intake
silencer and route the throttle
cable above the oil pump cable.
(VX700/VX700DX/VT700)
P
Carburetor heating lever
Q
Coolant hose
R
Speedometer cable
S
Under 50 mm (1.97 in)
T
Fasten the speedometer cable
and wire harness with a plastic
clamp. Install the clamp as close
to the drive V-belt guard bracket,
as possible (rearward).
CABLE ROUTING