Yamaha SXV70SJ Supplementary Service Manual - Chas
3-7
CHAS
8CH-10
8ED-10
T
R
.
.
6. Install:
•
Handlebar
CAUTION:
•
For SX700/MM700:
Be sure the projection on the handlebar is not
installed into the area
a
shown.
•
Be sure the side of the holder with the small
gap
b
faces forward.
•
Center the match mark
c
on the handlebar
1
between the lower handlebar holders
2
.
Bolt (handlebar holder):
23 Nm (2.3 m · kg, 17 ft · lb)
CAUTION:
•
First tighten the bolts on the front side of the
handlebar holder, and then tighten the bolts
on the rear side.
•
For SX700/MM700:
The handlebar for the SX700 (8CH5) has “8CH-
10” stamped on one end for identification. The
handlebar for the MM700 (8ED2) has “8ED-10”
stamped on one end. Since these handlebars
are specifically designed for the SX700 (8CH5)
and MM700 (8ED2), do not use them on any
future models.
STEERING
SCH3150
SCH3160
SCH3170
SCH3180