Yamaha SXV70SJ Supplementary Service Manual - Chas
3-6
CHAS
STEERING
T
R
.
.
5. Adjust:
•
Skis
Adjustment steps:
•
Temporarily install the handlebar.
•
Hold the handlebar straight and check that the
skis are at right angles to the handlebar.
•
Loosen the locknuts (relay rod)
1
.
•
Position the skis parallel in the riding direction.
•
With the skis in this position, turn the relay rod
2
in either direction until the handlebars at right
angles with respect to the direction of movement.
•
Tighten the locknuts (relay rod)
1
.
Locknut (relay rod)
1
:
25 Nm (2.5 m · kg, 18 ft · lb)
LOCTITE
®
Turning the relay rod
in direction
b
Turning the handlebar
in direction
d
Turning the relay rod
in direction
a
Turning the handlebar
in direction
c
T
R
.
.
4. Install:
•
Relay rod
1
NOTE:
Make sure that the end of the relay rod with the
indentation
a
is connected to the relay arm.
CAUTION:
Always use new cotter pins.
Nut (relay rod):
35 Nm (3.5 m · kg, 25 ft · lb)
SCH3140
SCH3130