3xLogic VX-2A-B-IWD (R) User Manual - page 119
VIGIL Software v8.8 User Manual | VISIX V-Series All-in-One Cameras
10225 Westmoor Drive, Suite 300, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
119
2). From the Scene Changesettings page, a user may configure scene changes settings and enable
day/night mode detection.
Descriptions of configurable settings are listed below:
Scene Change Setting
Description
Mode
Automatic – Automatically detect scene changes.
Manual - Manually trigger
Disabled – Disable Scene Changedetection.
Advanced Settings
Changed Time – The amount of time that must transpire after
a detected scene change to trigger event.
Changed Image Area – The amount of the image area that will
be utilized to detect scene changing.
Day/Night Mode Change
Detection
Select Enable to detect the transition between day and night. This
process works by looking for color from/to the grayscale transition
between two successive frames.
BURNT-IN ANNOTATION SETTINGS
Steps:
1). Opening the Setup Tab>VCAdrop-down menu and clicking the Burnt-In Annotationlink will
open the Burnt-In Annotation settings page.
Figure 7-74: Setup Tab –VCA Menu –Burnt-In Annotation Settings 1
(screenshot cont’d on next page)
Figure 7-75: Setup Tab –VCA Menu –Burnt-In Annotation Settings 2