3xLogic VX-2A-B-IWD (R) User Manual - page 55
VIGIL Software v8.8 User Manual | VISIX V-Series All-in-One Cameras
10225 Westmoor Drive, Suite 300, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
55
Time Setting
Description
Current Camera
Encoder Time
Displays the current camera time
Configuration
Time Zone - Select the cameratime zone.
Sync Source - Set the active NTP server as your time sync
source. Click the Go to NTP Configuration to be taken to the
NTP Settings page.
Date and Time Format – Choose a predefined date-format.
Enable 24-Hour to use standard 24 hour time.
New Camera / Encoder
Time
Set this Computer’s Date and Time – Selecting this option will
sync the camera’s time with your current computer system.
Set with NTP Server - Selecting this option will sync the
camera’s time with the displayed NTP server (Default:
time.windows.com)
Set Manually – Select this option to manually configure the
camera’s date and time.
3). Click Apply to save the new time settings.
STREAM
Steps:
1). Opening the Setup Tab>Basic Configurationdrop-down menu and clicking the Streamlink will
open the Stream settings page.
NOTE:
Advanced stream settings can also be accessed from the Setup Tab>Video Menu> Streamlink.
Figure 7-8: Setup Tab – Basic Configuration Menu – Stream Settings