3xLogic VX-2A-B-IWD (R) User Manual - page 88
VIGIL Software v8.8 User Manual | VISIX V-Series All-in-One Cameras
10225 Westmoor Drive, Suite 300, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
88
SRTP
Figure 7-50: Setup Tab –Network Configuration Menu – RTSP/RTP Settings – SRTP Configuration
Steps:
1). Under the SRTP (Secure RTP) Configuration section of the RTSP settings page, a user may
enable SRTP, a Protection Profile type may be chosen and Master and Saltkeysmay be
generated.
UNICAST
Figure 7-51: Setup Tab –Network Configuration Menu – RTSP/RTP Settings –Unicast Configuration
Steps:
1). Under the Unicast section of the RTSP settings page, a user may enable and configure Unicast
settings for the camera’s First (Main) and Second (Sub) streams. Before configuring, make sure
the desired stream tab has been selected (above the Unicastsection header).
Unicast Setting
Description
Name
Name the unicast stream.
Enable Metadata
Check-off this box to include metadata with the stream transmission.
Enable ONVIF Metadata
Check-off this box to include ONVIF metadata with the stream
transmission.
Enable QoS DSCP
Enable Quality of Service differentiated services.
Video / Meta / ONVIF
Meta DSCP
Assign DSCP levels for Video, Meta and ONVIF Meta. Low-latency services
will be dedicated starting with components featuring the highest DSCP
value.