3xLogic VX-2A-B-IWD (R) User Manual - page 126
VIGIL Software v8.8 User Manual | VISIX V-Series All-in-One Cameras
10225 Westmoor Drive, Suite 300, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
126
REPORT CONFIGURATION
Steps:
1). In the Report Configurationsection of the Add/Modify Recipient window, a user may
configure an email counter report settings.
Figure 7-81: Setup Tab –VCA Menu - Counter Reporting Settings–E-Mail Notifications Tab – Report Configuration
Report Setting
Description
Time
Select Report All Data to report all counter data within the schedule range.
If a custom range is desired, fill out the To and From fields to designate a time
range for the counter report.
Counter ID
Select the counter to report data on. An individual counter may be chosen by
selecting its corresponding ID (1-19). Select Active to report on only active
counters. Select Allto report on all counters.
Table (Sampling)
Select the table(s) to use in the report. Each table features a separate
Sampling Interval and Roll-Over Count. See
for more
information on configuring counter report tables.
Sorting Order
Select whether the results should be displayed in Ascending or Descending
order.
Value Type
Select whether the displayed results should be Absolute value of each counter,
or the Difference between counters.
Format
Select the report format for the email counter report.
2). Click Send Test Report to send a test report using the currently configured settings to the e-
mail entered in the E-mail Configuration section.
3). Click OK to save the new recipient. Click Cancel to close the window without saving the
recipient.