3xLogic VX-2A-B-IWD (R) User Manual - page 123
VIGIL Software v8.8 User Manual | VISIX V-Series All-in-One Cameras
10225 Westmoor Drive, Suite 300, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
123
2). Enabling Database Service will create a database to store counter reporting data.
3). Select the DB Storage medium by choosing either Flash (internal) orSD(removable storage)
from the drop-down menu. After selecting your storage medium, designate a Total DB Size (in
kilobytes). The maximum available amount of storage will vary depending on your chosen
storage medium.
4). Under the Tablessection, a user may enable up to four DB tables by checking off the
corresponding Enable Table x box.
The following table settings can be configured:
Table Settings
Description
Sampling Interval
Set the table’s sampling interval (in minutes).
Roll-Over Count
Set the table’s Roll-Over count. New entries will begin to replace the oldest
existing entries when the count has reached this value.
Max Roll-Over
Time
The maximum amount of time that can be allowed to transpire before
overwriting of the oldest existing entries will begin based on the defined
Sampling Interval and Roll-Over Count values. This setting is not directly
configurable.
5). Click Apply to save settings changes. ClickRestore Defaults to restore all settings to their
default state.
6). Under the Database Managementsection, a user may select Clear to clear the current
database. Select Back-Up to make a back-up copy of the database and its current structure
and content. The backup will be automatically downloaded to your browser’s Downloads
folder.
7). If the database requires restoration, select the Browse button next to the Restore From field
and select a DB backup file to restore DB structure and contents.
E-MAIL NOTIFICATION TAB – COUNTER REPORTING SETTINGS
Steps:
1). From the E-Mail Notificationtab, a user may configure VCA counter report e-mail notifications
and their related settings.
Figure 7-78: Setup Tab –VCA Menu - Counter Reporting Settings–E-Mail Notifications Tab
2). To enable VCA counter reporting e-mail notifications, check-off Enable E-Mail Notification.