3xLogic VX-2A-B-IWD (R) User Manual - page 39
VIGIL Software v8.8 User Manual | VISIX V-Series All-in-One Cameras
10225 Westmoor Drive, Suite 300, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
39
5.2 Camera Configuration Menu
SITE INFORMATION
Steps:
1). Opening the Basic Tab>Camera Configuration drop-down menu and clicking the Site
Information link will open the Site Information settings page.
Figure 5-2: Basic Tab – Camera Configuration – Site Information Form
2). From the Site Informationpage, a user may edit site information settings
Configuration settings including:
Field
Description
Company Name
The name of the company that owns the camera.
Site Name
The name of the field site in which the camera is deployed.
Camera Name
The name of the cameras. This will be used to identify the camera throughout
the VIGIL software suite.
VIGIL Connect Alias
VIGIL Connect allows VIGIL VMS/VISIX V-Series All-in-One users to remotely
connect to a VIGIL Server/V-Series All-in-One camera using the system serial
number or a user defined VIGIL Connect alias, without the need for extensive
changes to an existing network’s settings.
3). After finishing configuration, click Applyto save the new settings.
TIME
Steps:
1). Opening the Basic Tab>Camera Configuration drop-down menu and clicking the Timelink will
open the Time settings page.
Figure 5-3: Basic Tab – Camera Configuration – Time Settings
2). From the Time page, a user may view the camera’s current time or choose the camera’s time
zone. After finishing configuration, click Applyto save the new settings.