3xLogic VX-2A-B-IWD (R) User Manual - page 75
VIGIL Software v8.8 User Manual | VISIX V-Series All-in-One Cameras
10225 Westmoor Drive, Suite 300, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
75
ADDING/MODIFYING A SCHEDULE
Steps:
1). To add a schedule, click the Add…button (if modifying, select the desired schedule from the
list and click Modify…). The Addto ScheduleList form will deploy.
Figure 7-35: Setup Tab – Event Configuration Menu – Schedule Settings – Adding/Modifying Schedule
Schedule Setting Description
Name
Name the schedule. This name will be used to identify this particular schedule
when assigning it to an event.
Description
Provide a brief description of the schedule (intended use, etc…). This
description will be displayed when the schedule is selected on the schedule
settings page. .
Date
Check-off the Date box to enable. If enabled, a user may configure aStart and
End date range for the schedule.
Time
Check-off the Time box to enable. If enabled, a user may configure a Start and
End time range for the schedule.
Days
Select which days of the week to apply the schedule to.
2). After configuring the desired time range, click OK to save the new schedule.
E-MAIL RECIPIENTS
Steps:
1). Opening the Setup Tab>Event Configurationdrop-down menu and clicking the E-Mail
Recipientlink will open the E-Mail Recipientsettings page.
Figure 7-36: Setup Tab – Event Configuration Menu – E-Mail Recipients Settings