3xLogic VX-2A-B-IWD (R) User Manual - page 76
VIGIL Software v8.8 User Manual | VISIX V-Series All-in-One Cameras
10225 Westmoor Drive, Suite 300, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
76
2). From the E-Mail Recipientssettings page, a user may Add, Modify or Remove an e-mail
notification recipient. General recipient settings may also be edited, including Send Rate Limit
(minimum e-mail notification time interval) and content delivery modes (HTML Encoded or
Plain Text).
3). Select a recipient from the list to display recipient information. To remove a recipient, select
the desired recipient from the list and click Remove.
4). SMTP (E-mail Server) Settingsmust be configured in order for e-mail notifications to function.
Click the Go to SMTP (E-Mail) Settingslink to open the SMTP settings form and configure
settings as necessary. See
for more info.
ADD/MODIFY AN E-MAIL RECIPIENT
Steps:
1). To add a recipient, click the Add…button (if modifying, select the desired recipient from the
list and click Modify…). The Add/Modify E-Mail Recipientform will deploy.
Figure 7-37: Setup Tab – Event Configuration Menu – E-Mail Recipients Settings - Add/Modify a Recipient
2). Fill in the Name, Description and E-mail Addressfields for the desired recipient.
E-Mail Recipient Setting Description
Name
Name the recipient. This name will be used to identify this particular
recipient when assigning it to an e-mail notification.
Description
Provide a brief description of the recipient (intended use, etc…) This
description will be displayed when the schedule is selected on the
schedule settings page.
E-Mail Address
Enter the e-mail address of the recipient.
3). When you have filled in all the fields, click OK to save the new recipient.