3xLogic VX-2A-B-IWD (R) User Manual - page 63
VIGIL Software v8.8 User Manual | VISIX V-Series All-in-One Cameras
10225 Westmoor Drive, Suite 300, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
63
ENCODER PROFILE
Steps:
1). Opening the Setup Tab>Videodrop-down menu and clicking the Encoder Profilelink will open
the Encoder Profile settings page.
Figure 7-21: Setup Tab – Video Menu –Encoder Profile Settings
2). From the Encoder Profilesettings page, a user may Add, Copy, Modify or Remove an Encoder
Profile. An Encoder profile is a stream settings profile that delineates camera stream settings
based on pre-configured customized settings.
3). To Copy… or Remove…. an existing profile, select the profile from the list and click the
corresponding button.
For information on adding or modifying a profile, proceed through the following section of this manual.
ADDING OR MODIFYING AN ENCODER PROFILE
Steps:
1). To create or modify a new encoder profile, click the Add… button (if modifying, select the
desired profile from the list and click Modify…). This will deploy the below stream settings
form.
Figure 7-22: Setup Tab – Video Menu –Encoder Profile Settings – Adding/Modifying an Encoder Profile