3xLogic VX-2A-B-IWD (R) User Manual - page 124
VIGIL Software v8.8 User Manual | VISIX V-Series All-in-One Cameras
10225 Westmoor Drive, Suite 300, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
124
3). Once notifications are enabled, a user may Add, Modify or Remove a counter reporting e-mail
notification recipient. When adding/modifying a recipient, recipient and report settings may
also be edited.
4). Select a recipient from the list to display recipient information. To remove a recipient, select
the desired recipient from the list and click Remove.
5). SMTP (E-mail Server) Settingsmust be configured in order for e-mail notifications to function.
Click the Go to SMTP (E-Mail) Settingslink to open the SMTP settings form and configure
settings as necessary. See
for more info.
ADD/MODIFY A COUNTER REPORT E-MAIL NOTIFICATION RECIPIENT
Steps:
1). To add a recipient, click the Add…button (if modifying, select the desired recipient from the
list and click Modify…). The Add/Modify E-Mail Recipientform will deploy.
E-MAIL CONFIGURATION
Steps:
1). In the E-Mail Configuration section of the form, a user may enter basic recipient info.
Figure 7-79: Setup Tab –VCA Menu - Counter Reporting Settings–E-Mail Notifications Tab – Add/Modify E-Mail Recipient
2). Fill in the Name, Description and E-mail Addressfields for the desired recipient.
E-Mail Recipient Setting
Description
Name
Name the recipient. This name will be used to identify this particular
recipient when assigning it to an e-mail notification.
Description
Provide a brief description of the recipient (intended use, etc…). This
description will be displayed when the schedule is selected on the
schedule settings page.
E-Mail Address
Enter the e-mail address of the recipient.