3xLogic VX-2A-B-IWD (R) User Manual - page 72
VIGIL Software v8.8 User Manual | VISIX V-Series All-in-One Cameras
10225 Westmoor Drive, Suite 300, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
72
FACE DETECTION
Steps:
1). Opening the Setup Tab>Event Configurationdrop-down menu and clicking the Face Detection
link will open the Face Detectionsettings page.
Figure 7-31: Setup Tab – Event Configuration Menu – Face Detection Settings
2). From theFace Detection settings page, a user may draw up to four facial detection zones, and
activate each as necessary.
NOTE:
Do not confuse Facial Detectionwith Facial Recognition.Face detection merely detects the presence of
a human face. There is no Facial Recognition algorithm. The camera cannot be configured to recognize
specific faces.
3). Check off the Enable column box for the desired zone. This will deploy the zone over the
image. Resize the zone as desired.
4). ANameand Descriptionvalue can be assigned to each zone.
5). Click Apply to save any settings changes.