3xLogic VX-2A-B-IWD (R) User Manual - page 127
VIGIL Software v8.8 User Manual | VISIX V-Series All-in-One Cameras
10225 Westmoor Drive, Suite 300, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
127
ADVANCED VCA SETTINGS
Steps:
1). Opening the Setup Tab>VCAdrop-down menu and clicking the Advancedlink will open the
Advanced VCAsettings page.
Figure 7-82: Setup Tab –VCA Menu –Advanced VCA Settings
2). From the AdvancedVCA settings page, a user may configure settings related to advanced
operation of VCA video analytics.
Configurable settings include:
Advanced Setting
Description
Alarm Hold-Off Time
Configure the amount of time (in seconds) allowed to transpire between a
VCA event/alarm creation and the action which triggered the event/alarm.
Measurement Units
Select a desired measurement system from the available drop-down.
These units will be used for approximating VCA object height/area/speed.
Metric is the camera default.
Metadata Format
Metadata - Select your desired metadata categories: Event, Object, and
Counting. Select Do Not Send Empty Metadata Packetsto avoid sending
packets when there is no data available.
Diagnostic Metadata - Select your desired diagnostic metadata categories:
Blob (Motion), Counting Line, Tamper and Scene Change.
Stationary Object
Hold-On Time
Configure the amount of time the camera will track a stationary VCA object
before it ceases tracking.