3xLogic VX-2A-B-IWD (R) User Manual - page 23
VIGIL Software v8.8 User Manual | VISIX V-Series All-in-One Cameras
10225 Westmoor Drive, Suite 300, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
23
CONFIGURING A DWELL TIMER ZONE
Steps:
1). To configure a VCA Zone with Dwell Timer Alarm, navigate to the Setup (Advanced) Tab > VCA
> Zones and Rules settings page.
2). Right-click in the video preview area and select Zone/Line>Create Zone.
3). Draw the zone as desired by clicking and dragging each corner until a satisfactory shape and
position is achieved.
4). Assign a Nameand Color to the zone.
Figure 4-11: Configuring a VCA Dwell Timer Zone
5). Enable the Dwellrule.
6). Set an appropriate dwell Threshold. 5 seconds is used in the above example.
7). Click Apply to save the new zone settings.
An analytics dwell event(alarm) will now trigger whenever an object has spent more than 5 seconds in
the defined zone. For instructions on previewing your analytics overlay, navigate to