Cabletron Systems CSX100 series User Manual - Log
M
anagement Tools
87
If you have changed the incoming or outgoing data calls settings, you
will be prompted to save your changes permanently. Since these settings
take effect immediately, there is no need to restart the router after saving
the changes.
Log
A logging function is available to see all the messages printed by the
router on its console port (including any input performed directly at the
console). You also have the option to save the content of the log window
to a file of your choice: this is very useful to Technical Support.
When you click Log Start, you will prompted to supply the
administrative password, if you have not done so already. When you
close the log window or click Log Stop, the logging function is
terminated and the log file, if any, is closed.
Upgrade/Backup
This menu gives you the options upgrade and backup or restore the following
files:
•
Firmware
•
Script
•
Configuration
•
DHCP settings
•
ISDN settings
Upgrade lets you upgrade or restore files from your PC to the router. With
Backup, the files are downloaded from the router to your PC.
A TFTP utility, necessary to perform these operations, is integrated into
Configuration Manager, but can also be used as a stand-alone application.
Instructions
⇒
Click Tools from the main menu and then click Upgrade/Backup.
⇒
Select one of the five options (Firmware, Script file, Configuration,
DHCP Settings, ISDN Settings) and click Upgrade (or Execute or
Restore depending on the files you have selected) or Backup.
A window will appear and give you the following default files in the
name box: