Cabletron Systems CSX100 series User Manual - Instructions:
Manual is about: Cabletron Systems ISDN Router
of
153
Installing and Accessing Configuration Manager
15
Step 1. Connect the Router to the Ethernet LAN
The 10Base-T port is used for Ethernet communications for single station or
hub configurations. Connect the Ethernet LAN using the following
instructions.
Configuration A: Ethernet single station
Single Station
Instructions:
1. Connect the 10Base-T Ethernet cable (yellow label marked
“Ethernet 10 Base-T, Crossover”) to the RJ45 twisted pair Ethernet
(TPE) jack marked 10 Base-T on the unit.
2. Connect the other end to the Ethernet board in your PC.