Cabletron Systems CSX100 series User Manual - Instructions
ISDN Router
90
Note 2: A Trivial File Transfer Protocol (TFTP) utility is built into
Configuration Manager and is capable of reading from and writing to the
network.
Instructions
⇒
To reboot from the network, click Tools from the Configuration
Manager’s main menu and then click Reboot from Network.
A new window will appear and let you select the file to boot from, in the
file name box. KERNEL.100 is the default file.
⇒
Click OK to enable your choice.
⇒
Enter your login password and click OK.
SNMP Options
The router is preconfigured with the following SNMP default settings:
•
public for the Community Name
•
161 for the UDP Port
You may, however, want to change the default settings for security reasons or
to allow SNMP monitoring of a device located on the LAN while running
NAT; both the device and the router can be monitored or managed at
different UDP ports. Changing the settings will affect only the Windows
configuration parameters but will not change the actual settings in the router.
The router values can only be changed with the Command Line Interface
using the system snmpport or system community command.
Instructions
⇒
Click Tools and SNMP Options.
⇒
You may set the UDP Port to any number between 1 and 65,535.
Make sure that the port you select does not conflict with another
defined port.
⇒
The Community Name can be a string of up to 40 characters.
Special characters are allowed.