Cabletron Systems CSX100 series User Manual - Telnet
ISDN Router
100
system upgrades can be updated. Chapter 6, Management Tools, describes
how to upgrade software, boot the router from the network, make copies of
configuration files, and perform other maintenance procedures. A TFTP
server is provided with the software.
TELNET
TELNET access to the router is supported. TELNET allows you to log into
the router as if directly connected through the console port. In this manner
you can issue commands, using the Command Line Interface, to configure the
router and perform status monitoring from any remote location. Any of the
available TCP/IP packages containing the TELNET application can be
utilized. Refer to the Command Line Interface for more information.
A special feature, History Log, described on page 110, allows the redirection
of all console output (including notifications that would only appear at the
console terminal) to any TELNET session.
Windows GUI Configurator
A Microsoft® Windows™-based program, Configuration Manager, is
provided for configuring the router. This Windows GUI point-and-click
configurator is described in the chapter Installing and Accessing
Configuration Manager. A Winsock-compliant TCP/IP stack must be
installed on your PC to run Configuration Manager.
Command Line Interface
Configuration is also supported through the Command Line Interface. This
interface provides the ability to configure the same basic features as the
Windows GUI configurator, but through the console port or Telnet. It also
gives you the following capabilities:
•
PPP Call Back
•
Online status commands and error message monitoring
•
Statistics
•
Unique PAP or CHAP authentication or system name passwords