Cabletron Systems CSX100 series User Manual - History Log
ISDN Router
110
86
Call having the requested call identity has been cleared
88
Incompatible destination
91
Invalid transit network selection
95
Invalid message, unspecified
96
Mandatory information element is missing
97
Message type non-existent or not implemented
98
Message not compatible with call state or message type non-
existent or not implemented
99
Information element non-existent or not implemented
100
Invalid information element contents
101
Message not compatible with call state
102
Recovery on timer expiration
111
Protocol error, unspecified
127
Internetworking, unspecified
History Log
The History Log utility is a troubleshooting tool which displays the router’s
activity. It can be accessed from a terminal emulation session (including
Configuration Manager) or from Telnet.
1. If accessing the logging utility through Telnet, click Connect from the
menu, Remote System, and enter the router’s IP address. Click Connect.
If accessing the logging utility through Configuration Manager, select
Tools and Terminal Window (the console cable is required).
2. Log in with your administration password into the router (e.g. “admin”).
3. Use the command system history to view the buffer contents.
Other logging commands:
•
If you wish to monitor your router activity at all time, enter the command
system log start
to view a continuous log, if you are using Telnet.
(This command will not work in a Terminal Window session, but only
from Telnet.)
•
The command system log status is used to find out if other users,
including yourself, are using this utility.
•
Todiscontinue the log at the console, use the command system log
stop
.
When you exit Telnet, you automatically stop any logging programs running
in that session.