Cabletron Systems CSX100 series User Manual - The Terminal Window
ISDN Router
82
The File menu lets you open a Log File where all messages printed by the
router on its console and all input performed directly at the console are
recorded.
The CommPort menu allows the user to adjust the router’s communication
settings.
How to change the router’s IP address using
the Terminal Window
The user may wish to change the default IP address of 192.168.254.254 to a
different address. This can be simply done using the Terminal Window to
access the Command Line Interface.
The router’s address is changed to be in the same IP subnetwork as the PC.
However, the PC’s address remains the same.
Instructions
1. The console (serial) cable allows you to access the Command Line
Interface via Configuration Manager. Refer to Appendix D,
Accessing the Command Line Interface, page 119 for installation
and cable instructions.
2. Click the menu button Tools and then select Terminal Window to
change the router’s address.
3. Verify that the communication settings are set as shown in the
picture below, and that the correct comport is selected.