Cabletron Systems CSX100 series User Manual - Reset Defaults
M
anagement Tools
89
⇒
When you click OK, the file named AUTOEXEC.OLD is copied
back to the router.
Upgrade/Restore Configuration files
A Backupor Upgrade operation on the configuration files will include all
of the system configuration data, except ISDN or DHCP settings files.
Upgrade/Backup ISDN settings or DHCP files
Backing up or upgrading the target system ISDN settings file or DHCP
file will respectively involve only the target systems ISDN settings file or
only DHCP file. The files will be copied to the directory C:/CFGMGR by
default.
Reset defaults
This feature allows you to clear all of your configuration files
(ISDN.DAT, SYSTEM.CNF, DHCP.DAT) and to go back to the original
factory default settings.
⇒
Click Reset Defaults. A message will ask you if you want to clear
your configuration files.
⇒
If you answer Yes, the router will reboot.
Note: It is recommended that you back up all of your existing
configuration files before resetting the defaults in your router.
Reboot from Network
Reboot from Network is used in the following situations:
•
To perform Beta testing (e.g., testing new router software before
downloading to FLASH memory)
•
To allow several routers to reboot from the same file on a server
Rebooting from the network will upload the file you have specified into the
router and execute it.
Note 1: KERNEL.100 is the default file and is installed under the default
directory C:\CFGMGR or wherever you may have installed Configuration
Manager.