Cabletron Systems CSX100 series User Manual - Router Configuration
Configuring Advanced Features 69
4. If the TCP/IP stack is installed on your PC (it will be listed under
Configuration), proceed to step 5.
Note: If you do not have a TCP/IP stack installed on your computer,
follow these instructions:
a) In Configuration, click Add.
b) In Select Network Component Type, click Protocol and click Add.
c) In Select Network Protocols, under Manufacturers, click
Microsoft.
d) In the same Network Protocolswindow, click TCP/IP, and click
OK.
5. Under Configuration, double-click TCP/IP. Select Obtain an IP
address automatically.
Note: If you are connecting to a Windows NT server:
1. Click the Wins Configuration tab.
2. Click Use DHCP for WINS Resolution.
3. Click OK.
6. Click the DNS Configuration tab and select Disable DNS. Click OK.
7. You are now back in the Network window. Select the Identificationtab.
Enter a computer name, a workgroup name, and computer description
if you wish. Click OK.
8. Files are now being copied.
A “Setting Changes” message will ask you if you wish to restart your
computer. Answer Yes.
The PC has finished rebooting. It can now acquire its own IP address
from the router using DHCP.
9. You now need to run Configuration Manager to enter the DNS and a
domain name into the router. On the next boot, the PC will learn the DNS
and Domain Name from the router.
Router Configuration
The following configuration instructions are intended for users who are
primarily configuring their router for Internet access.