Cabletron Systems CSX100 series User Manual - Instructions
ISDN Router
22
Hardware and Software Prerequisites
Configuration Manager requires the following hardware and system
configuration:
•
IBM-compatible Personal Computer
•
Ethernet network interface card
•
8.0 MB of hard disk space (5.0 MB for Configuration Manager and on-
line documentation plus up to 3.0 MB for the files to be installed in the
\WINDOWS\SYSTEM directory)
•
Microsoft Windows 3.1, Windows for Workgroups, Windows 95, or
Windows NT
•
Winsock 1.1-compliant TCP/IP stack installed and running on your PC
(included with Windows 95)
Install Configuration Manager
To access Configuration Manager, you will first configure your PC to obtain
an IP address automatically, and then install the Configuration Manager
application.
Note 1: Windows 95 is assumed throughout this section.
Set your PC to obtain an IP address
This section assumes that you have already:
•
connected the router’s cables.
•
powered on the router.
Instructions
1. From the taskbar, click the Start button, select Settings, ä
ä Control
Panel, ä Network.
2. You are now in the Network window. In the Configuration tab page,
double-click TCP/IP (to configure your network adapter).