Cabletron Systems CSX100 series User Manual - Configuration Steps
RouterCo
nfiguration
37
Configuration Steps
Overview
If you have collected the required information as described in the preceding
section, you are ready to configure the router.
Using Configuration Manager, you will perform the following basic
configuration steps:
1. Connect, Select the Router to configure, and log into the target
router.
2. System Settings
Configure the target router’s system settings including:
•
System Name
•
System Message (optional)
•
Dial Authentication Password
•
Ethernet IP Address and LAN RIP Settings
•
DHCP Settings
•
If configuring IPX: Ethernet IPX Network #
•
Change Login Password (optional)
3. ISDN Settings
Configure the target router’s ISDN Settings including:
•
ISDN Switch Settings: SPIDs, DNs, Switch type
•
Analog Phone Settings (for POTS routers)
4. Remote Routers
Add Remote Routers to the remote router database and configure the
following remote router information:
•
ISDN Dial Settings: Caller ID, Call Back information, Bandwidth
management controls
•
Security information
•
Bridging capability