Cabletron Systems CSX100 series User Manual - Upgrade/backup Options
ISDN Router
88
•
For Firmware, the default file is KERNEL.100
•
For Configuration, the default file is SYSTEM.CNF
•
For ISDN, the default file is ISDN.DAT
•
For DHCP, the default file is DHCP.DAT
Note: the script file name is defined by the user.
⇒
Click OK if the displayed file name is right.
⇒
Otherwise select the proper file and directory from the list below the
name box and click OK.
Upgrade/Backup Options
Upgrade/Backup Firmware
The firmware (kernel) resides in the router. It is automatically backed up
to your PC, when you first connect to the router.
Upgrading the Firmware should only be done when advised by Technical
Support or when you are installing a new version/upgrade of the router’s
firmware.
Execute/Backup Script file
This feature is used to load batch files of configuration commands into
the router. This allows for customization and simpler installation of the
router. A script file can contain commands, comments (lines introduced
by the # or ; characters) and blank lines.
The file is created on your PC using Notepad or other text editor. The
command syntax can be found in the Command Line Reference.
Execute a Script file
⇒
Select Tools, Upgrade/Backup, Script Files.
⇒
Click Execute and choose the script file you just prepared.
⇒
When you click OK, the script file is loaded to the router (under the
name AUTOEXEC.BAT) and the router is restarted, thus executing
the script.
Backup a Script file
⇒
Select the Tools, Upgrade/Backup, Script Files. Click Backup.
The Script file is backed up from the router to your PC.