Cabletron Systems CSX100 series User Manual - page 52
ISDN Router
38
•
TCP/IP route addressing and routing protocol controls
•
If configuring IPX: IPX Routes addressing and IPX SAPs services
5. Bridging / Routing
•
Set the default bridging destination
•
Enable IP routing
•
If configuring IPX: Enable IPX routing
•
Enable the Internet Firewall
•
Enable WAN-to-WAN Forwarding
6. Store
Save the router’s configuration
7. Reboot the router
8. Verify the router’s configuration
As you step through the configuration, each setting you change results in a
dynamic update of the router’s configuration. Some changes, though, don’t
take effect until you store the configuration and reboot the router.
Note: Changes requiring a reboot of the router
System Settings:
Ethernet IP
IPX Address and options
Bridging and Routing Controls:
TCP/IP Routing
IPX Routing
Default Bridge Destination
Remote Router:
TCP/IP Route Addresses
IPX Routes
IPX SAPs
Bridging
Add or remove remote router entries