Cabletron Systems CSX100 series User Manual - Authentication Password
ISDN Router
42
Authentication Password
The target router’s dial authentication password is used for
authentication when the target router dials out to other routers or is
challenged by them. The password is not displayed as you enter it and
must be entered twice. A new password overrides the previous one.
⇒
To set the password, click Authentication Password and enter the
new password twice in the small window.
⇒
Click OK to set the password.
Ethernet IP Address and LAN RIP Settings
You have the option to enter or change your router’s Ethernet IP address
and IP protocol control information (LAN RIP Settings).
Ethernet IP Address
For IP routing
,
click Ethernet IP Address if you wish to change the
Ethernet IPaddress and subnet mask from the default. The following
window displays the default IP address and subnet mask (factory default).
Changing the IP Address and Mask
⇒
Use this window if you wish to change the router’s IP address and
subnet mask. This may occur, for example, if a company already has
a LAN network and users are given specific addresses to use by their
network administrator.
⇒
Click OK to save the changes and exit the window.