D-Link DES-3528 - xStack Switch - Stackable User Manual - Lldp Dot3 Tlvs Settings
xStack DES-3528 Series Layer 2 Stackable Fast Ethernet Managed Switch User Manual
111
Click Apply to implement changes made.
LLDP Dot3 TLVs Settings
To view this window, Click L2 Features > LLDP > LLDP Dot3 TLVs Settings
Figure 7- 51. LLDP Dot3 TLVs Settings window
The following parameters can be set:
Parameter Description
From Port/To
Port
Use the drop-down menu to select a range of ports to be configured.
MAC/PHY
Configuration
Status
Use the drop-down menu to configure the advertise MAC or PHY status of the switch.
Link Aggregation Use the drop-down menu to enable or disable the advertise link aggregation state on the Switch.
Maximum Frame
Size
Use the drop-down menu to enable or disable the advertise Maximum Frame Size.
Click Apply to implement changes made.
LLDP Statistics System
LLDP Statistics System allows you to view the LLDP Stastics on the Switch and also the settings for individual ports.
Use the drop-down menu to check a specific port and click Find the information will be displayed in the lower half of
the table.
To view this window, Click L2 Features > LLDP > LLDP Statistics System