D-Link DES-3528 - xStack Switch - Stackable User Manual - page 23
xStack DES-3528 Series Layer 2 Stackable Fast Ethernet Managed Switch User Manual
7
Installing the Switch without the Rack
When installing the Switch on a desktop or shelf, the rubber feet included with the Switch should first be attached.
Attach these cushioning feet on the bottom at each corner of the device. Allow enough ventilation space between the
Switch and any other objects in the vicinity.
Figure 2- 1. Preparing the DES-3528 for installation on a desktop or shelf
Installing the Switch in a Rack
The Switch can be mounted in a standard 19" rack. Use the following diagrams to guide you.
Figure 2- 2. Fasten mounting brackets to the DES-3528
Fasten the mounting brackets to the Switch using the screws provided. With the brackets attached securely, you can
mount the Switch in a standard rack as shown in Figure 2-3 below.