D-Link DES-3528 - xStack Switch - Stackable User Manual - Web Pages
xStack DES-3528 Series Layer 2 Stackable Fast Ethernet Managed Switch User Manual
20
configuration.
Area 3
Presents switch information based on your selection and the entry of configuration data.
NOTICE: Any changes made to the Switch configuration during the current
session must be saved in the Save Changes web menu (explained below)
or use the command line interface (CLI) command save.
Web Pages
When you connect to the management mode of the Switch with a web browser, a login window is displayed. Enter a
user name and password to access the Switch's management mode.
Below is a list and description of the main folders available in the web interface:
Configuration – Contains windows concerning configuring the basic functions of the Switch, including accessing the
System information, Serial Port Settings, IP Address, Port Configuration, Static ARP Settings, User Accounts, System
Log Configuration, System Severity Settings, DHCP/BOOTP Relay, DHCP Auto Configuration Settings, MAC Address
Aging Time, Web Settings, Telnet Settings, Password Encryption, Clipaging Settings, Firmware Information, Dual
Configuration Settings, Ping Test, SNTP Settings, MAC Notification Settings, SNMP Settings, Time Range Settings
and Single IP Management.
Layer 2 Features – Contains windows concerning Layer 2 features of the Switch, including Jumbo Frame, 802.1Q
VLAN, QinQ, 802.1v Protocol VLAN, GVRP Settings, GVRP Timer Settings, Asymmetric VLAN Settings, MAC-based
VLAN Settings, PVID Auto Assign Settings, Port Trunking, LACP Port Settings, Traffic Segmentation, IGMP Snooping,
MLD Snooping Settings, Port Mirror, Loopback Detection Settings, Spanning Tree, Forwarding & Filtering and LLDP.
QoS – Contains windows concerning HOL Prevention Settings, Bandwidth Control, Traffic Control, 802.1P Default
Priority, 802.1P User Priority, QoS Scheduling Mechanism and SRED.
Security – Contains windows for Safeguard Engine, Trusted Host, IP-MAC-Port Binding, Port Security, DHCP Server
Screening, 802.1x, SSL Settings, SSH, Access Authentication Control, MAC-Based Access Control, Web
Authentication, JWAC and NetBIOS Filtering Services.
ACL – Contains the window for ACL Configuration Wizard, Access Profile List, CPU Access Profile List, ACL Finder,
and ACL Flow Meter.
Monitoring – Contains windows for Device Status, CPU Utilization, Port Utilization, Packet Size, Packets, Errors, Port
Access Control, Browse ARP Table, Browse VLAN, Show VLAN Ports, Browse Router Ports, Browse MLD Router
Ports, Browse Session Table, IGMP Snooping, MLD Snooping Group, JWAC Host Table, MAC Address Table and
System Log.
NOTE: Be sure to configure the user name and password in the User
Accounts window before connecting the Switch to the greater network.