D-Link DES-3528 - xStack Switch - Stackable User Manual - 802.1X User

xStack DES-3528 Series Layer 2 Stackable Fast Ethernet Managed Switch User Manual 

802.1X User 

To create a new 802.1X User enter a user name and password then reconfirm the password and click Apply, the new 

user will be displayed in the lower half of the table.  To delete an entry click the corresponding Delete button.   

To configure the 802.1X User, click Security > 802.1X > 802.1X User 

Figure 9- 23. 802.1X User window 

Authentication RADIUS Server 

The RADIUS feature of the Switch allows you to facilitate centralized user administration as well as providing 

protection against a sniffing, active hacker. 

To configure the 802.1X User, click Security > 802.1X > Authentication RADIUS Server 

Figure 9- 24. Authentic RADIUS Server window 

This window displays the following information: 

Parameter                            Description 

Index 

Choose the desired RADIUS server to configure: 1, 2 or 3. 

IP Address 

Set the RADIUS Server IP. 

Authentic Port  

(1-65535) 

Set the RADIUS authentic server(s) UDP port. The default port is 1812. 

Accounting Port  

(1-65535) 

Set the RADIUS account server(s) UDP port. The default port is 1813. 

Timeout (1-255) 

Enter the timeout value in seconds (1 to 255) the default value is 5. 

Retransmit (1-255) 

Set the retransmit value in seconds (1 to 255) the default value is 2. 

Key  

(Max. length 32 bytes) 

Set the key the same as that of the RADIUS server. Maximum length of the entry is 32 

bytes.   

143