D-Link DES-3528 - xStack Switch - Stackable User Manual - page 231
xStack DES-3528 Series Layer 2 Stackable Fast Ethernet Managed Switch User Manual
To view the Transmitted (TX) Table window, click the link
View Table
.
Figure 11- 1 . Transmitted (TX) Table window (for Bytes and Packets)
1
The following fields may be set or viewed:
Parameter Description
Port
Use the drop-down menu to choose the port that will display statistics.
Time Interval
Select the desired setting between 1s and 60s, where "s" stands for seconds. The default
value is one second.
Record Number
Select number of times the Switch will be polled between 20 and 200. The default value is
200.
Bytes
Counts the number of bytes successfully sent on the port.
Packets
Counts the number of packets successfully sent on the port.
Unicast
Counts the total number of good packets that were transmitted by a unicast address.
Multicast
Counts the total number of good packets that were transmitted by a multicast address.
Broadcast
Counts the total number of good packets that were transmitted by a broadcast address.
Show/Hide
Check whether or not to display Bytes and Packets.
Clear
Clicking this button clears all statistics counters on this window.
View Table
Clicking this button instructs the Switch to display a table rather than a line graph.
View Graphic
Clicking this button instructs the Switch to display a line graph rather than a table.
215