D-Link DES-3528 - xStack Switch - Stackable User Manual - Jwac Port Settings
xStack DES-3528 Series Layer 2 Stackable Fast Ethernet Managed Switch User Manual
JWAC Port Settings
To view JWAC port settings for the Switch, click Security > JWAC > JWAC Port Settings.
Figure 9- 48. JWAC Port Settings window
To set the JWAC on individual ports for the Switch, complete the following fields:
Parameter Description
From Port / To Port
Lists the range of Ports that will be configured in this window.
Aging Time
(1-1440 Minutes)
This parameter specifies the period of time a host will keep in authenticated state after it
successes to authenticate. Enter a value between 1 and 1440 minutes. The default setting is
1440 minutes. To maintain a constant Port Configuration tick the Infinite check box in the
JWAC configuration window.
MAX Authenticating
Host
This parameter specifies the maximum number of host process authentication attempts
allowed on each port at the same time.
Idle Time
(1-1440 Minutes)
This parameter specifies the period of time during which there is no traffic for an
authenticated host and the host will be moved back to the unauthenticated state. Enter a
value between 1 and 1440 minutes. A value of Infinite indicates the Idle state of the
authenticated host on the port will never be checked. The default setting is Infinite.
Block Time
(0-300 Seconds)
This parameter specifies the period of time a host will keep in a blocked state after it fails to
authenticate. Enter a value between 0 and 300 seconds. The default setting is 0 seconds.
State
This parameter specifies the state of the configured ports.
Click Apply to implement changes made.
169