D-Link DES-3528 - xStack Switch - Stackable User Manual - page 166
xStack DES-3528 Series Layer 2 Stackable Fast Ethernet Managed Switch User Manual
security shell encryptions. The available options are Never, 10 min, 30 min, and 60 min. The
default setting is Never.
Click Apply to implement changes made.
SSH Authmode and Algorithm Settings
The SSH Algorithm window allows the configuration of the desired types of SSH algorithms used for authentication
encryption. There are four categories of algorithms listed and specific algorithms of each may be enabled or disabled
by checking the boxes. All algorithms are enabled by default.
To view this screen click, Security > SSH > SSH Authmode and Algorithm Settings
Figure 9- 31. SSH Authmode and Algorithm Settings window
The following algorithms may be set:
Parameter
Description
SSH Authentication Mode Settings
Password
This parameter may be enabled if the administrator wishes to use a locally configured
password for authentication on the Switch. The default is enabled.
Public Key
This parameter may be enabled if the administrator wishes to use a public key configuration
set on a SSH server, for authentication on the Switch. The default is enabled.
Host-based
This parameter may be enabled if the administrator wishes to use a host computer for
authentication. This parameter is intended for Linux users requiring SSH authentication
techniques and the host computer is running the Linux operating system with a SSH
program previously installed. The default is enabled.
Encryption Algorithm
3DES-CBC
Use the pull-down to enable or disable the Triple Data Encryption Standard encryption
algorithm with Cipher Block Chaining. The default is enabled.
Blow-fish CBC
Use the pull-down to enable or disable the Blowfish encryption algorithm with Cipher Block
Chaining. The default is enabled.
AES128-CBC
Use the pull-down to enable or disable the Advanced Encryption Standard AES128
encryption algorithm with Cipher Block Chaining. The default is enabled.
AES192-CBC
Use the pull-down to enable or disable the Advanced Encryption Standard AES192
encryption algorithm with Cipher Block Chaining. The default is enabled.
AES256-CBC
Use the pull-down to enable or disable the Advanced Encryption Standard AES-256
encryption algorithm with Cipher Block Chaining. The default is enabled.
ARC4
Use the pull-down to enable or disable the Arcfour encryption algorithm with Cipher Block
Chaining. The default is enabled.
150