D-Link DES-3528 - xStack Switch - Stackable User Manual - Port Security Fdb Entries
xStack DES-3528 Series Layer 2 Stackable Fast Ethernet Managed Switch User Manual
Figure 9- 9. Port Security Settings window
The following parameters can be set:
Parameter Description
From Port/To Port
A consecutive group of ports may be configured starting with the selected port.
Admin State
This pull-down menu allows you to enable or disable Port Security (locked MAC address table
for the selected ports).
Max. Learning
Address (0-64)
The number of MAC addresses that will be in the MAC address-forwarding table for the
selected switch and group of ports.
Lock Address
Mode
This pull-down menu allows you to select how the MAC address table locking will be
implemented on the Switch, for the selected group of ports. The options are:
Permanent – The locked addresses will not age out after the aging timer expires.
DeleteOnTimeout – The locked addresses will age out after the aging timer expires.
DeleteOnReset – The locked addresses will not age out until the Switch has been
reset.
Click Apply to implement changes made.
Port Security FDB Entries
This table is used to clear the Port Lock Entries by individual ports, to clear entries enter the range of ports and click
Clear.
To view the following window click, Security > Port Security > Port Security FDB Entries
133