D-Link DES-3528 - xStack Switch - Stackable User Manual - Transmitted (Tx)
xStack DES-3528 Series Layer 2 Stackable Fast Ethernet Managed Switch User Manual
The following fields may be set or viewed:
Parameter Description
Port
Use the drop-down menu to choose the port that will display statistics.
Time Interval
Select the desired setting between 1s and 60s, where "s" stands for seconds. The default
value is one second.
Record Number
Select number of times the Switch will be polled between 20 and 200. The default value is
200.
Unicast
Counts the total number of good packets that were received by a unicast address.
Multicast
Counts the total number of good packets that were received by a multicast address.
Broadcast
Counts the total number of good packets that were received by a broadcast address.
Show/Hide
Clicking this button clears all statistics counters on this window.
View Table
Clicking this button instructs the Switch to display a table rather than a line graph.
View Graphic
Clicking this button instructs the Switch to display a line graph rather than a table.
Check whether or not to display Multicast, Broadcast, and Unicast Packets.
Clear
Transmitted (TX)
To select a port to view these statistics for, select the port by using the Port pull-down menu. The user may also use
the real-time graphic of the Switch at the top of the web page by simply clicking on a port.
To view the following graph of packets transmitted from the Switch Click Monitoring > Packets > Transmitted (TX).
Figure 11- 1 . Transmitted (TX) window (for Bytes and Packets)
0
214