D-Link DES-3528 - xStack Switch - Stackable User Manual - 802.1X Force Disconnect
xStack DES-3528 Series Layer 2 Stackable Fast Ethernet Managed Switch User Manual
802.1X Force Disconnect
To configure the 802.1X Force Disconnect, click Security > 802.1X > 802.1X Force Disconnect
Figure 9- 21. 802.1X Force Disconnect window
Use the drop down menu to select either Port or MAC Address and enter the corresponding information, click Force
Disconnect for the changes to take effect.
802.1X Settings
To configure the 802.1X Settings, click Security > 802.1X > 802.1X Settings
Figure 9- 22. 802.1X Settings window
This window allows you to set the following features:
Parameter Description
Auth Mode
The Auth Mode allows the user to choose among, Disabled, Port Based or MAC Based
Authentication Mode.
Auth Protocol
Choose the Auth Protocol either RADIUS EAP or Local.
Forward EAPOL
PDU
This enables or disables the Switch retransmit EAPOL PDU Request.
From Port/To
Port
Enter the port or ports to be set.
141