EDAN F6 User manual - 11.2 Installation Guide

F9, F9 Express Fetal & Maternal Monitor User Manual                            FTS-3 Fetal Telemetry System 

- 118 - 

11.2 Installation Guide 

WARNING

The system installation should be operated by serviceman authorized by the 

manufacturer. 

11.2.1 Opening the Package and Checking 

Visually examine the package prior to unpacking. If any signs of mishandling or damage are 

detected, contact the carrier to claim for damage. 

Open the package; take out the base station and accessories carefully. Keep the package for 

possible future transportation or storage. Check the components according to the packing list. 

‹  Check for any mechanical damage. 

‹  Check all the cables and accessories. 

If there is any problem, contact us or your local distributor immediately. 

11.2.2 Installing Battery 

WARNING

Switch off FTS-3 and unplug it before installing or removing the battery. 

NOTE:

1  If the system is provided with a rechargeable base station battery, please charge the 

battery after each transportation and storage. 

2  Please charge the battery to the full after each use. When the system is powered on 

with the AC power supply, the battery is charging. Please do not interrupt the 

charging and wait until the battery is fully charged. 

If the system is provided with a rechargeable lithium-ion battery, follow these steps to install the 

battery: 

(1) Battery Installation 

a) 

Place FTS-3 upside down on a flat surface covered with cloth or another type of protecting 

pad. 

b) 

Remove the screws of the battery compartment using a cross-head screw driver. Remove the 

battery compartment cover.