EDAN F6 User manual - 8.2 Trace Control Tools

F Series Fetal & Maternal Monitor User Manual                          Fetal Monitoring Display 

- 75 - 

8.2 Trace Control Tools 

                                            1                                                                    2                              3                    4 

Figure 8-2 Trace Control Tools 

1  Searching Key 

2 

Reviewing Keys 

3  Alarm Reviewing Key 

4 

CTG Analyzing Key 

8.2.1 Data Saving 

When the START key is pressed, the monitor saves data of the previous ID in a file, and then 

clears it from the main interface. The main interface only displays the new patient’s data. During 

monitoring, the data is saved every 10 minutes. All data of the same patient is saved in a file (the 

maximum duration is 24 hours, the rest data is saved in another file.) 

The files are stored in the monitor. When the data amount reaches the maximum capacity (300 

files or approximately 60-hour), the monitor deletes the oldest file(s) automatically. 

8.2.2 *Searching for a File 

The searching key 

  under the traces is used to search for a patient’s data file saved 

in the monitor. 

To search for a patient, 

1 Select the searching key to open the file list. It contains six sets of most recent patient’s ID, 

name and start time of monitoring. Select the required item, this file is loaded to the main 

interface immediately. 

Figure 8-3 File List