EDAN F6 User manual - page 162
F Series Fetal & Maternal Monitor User Manual Signal Input/Output Connector
- 151 -
Appendix 2 Signal Input/Output Connector
Accessory equipment connected to these interfaces must be certified according to the respective
IEC/EN standards (e.g. IEC/EN 60950 for data processing equipment and IEC/EN 60601-1 for
medical equipment). Furthermore all configurations shall comply with the valid version of the
system standard IEC/EN 60601-1-1. Anybody who connects additional equipment to the signal
input connector or signal output connector to configure a medical system must ensure that the
system complies with the requirements of the valid version of the system standard IEC/EN
60601-1-1. If in doubt, contact our technical service department or your local distributor.
DB9 Interface
D-Sub Interface
Pin Signal
Input/Output
1 +5V
Output
2 Rx
Input
3 Tx
Output
4 485EN Input
5 0V
Ref.
6 TA
Output
7 TB
Output
8 RA
Input
9 RB
Input
Pin Signal
Input/Output
1 US2
Input
2 ISOCNS_RXD
Input
3 ISOCNS_TXD
Output
4 485EN
Input
5 0V
Ref.
6 TA
Output
7 TB
Output
8 RA
Input
9 RB
Input
10 DECG_SIGNAL
Input
11 US1
Input
12 +5V
Output
13 TOCO
Input
14 DECG_GND
15 EN
Input