EDAN F6 User manual - page 54
F Series Fetal & Maternal Monitor User Manual Printing
- 43 -
Figure 5-1 An example of recorder paper with traces
Item Information
Description
1.
Self-Check
Trace
The monitor prints a self-check trace after being switched on. It is
used to check if the recorder paper is properly loaded.
2.
Paper
Settings
The paper settings of the monitor. It consists of the paper type and
paper style, e.g. “G 50-210”, indicating that the paper type is “F9-G”,
and the paper style is International. It is printed out to check if the
proper recorder paper is used.
3.
Paper Type
There are two types of paper: F9-G and F9-P.
4.
Paper
Style
The FHR pane range indicates the paper style.
American style: 30 ~ 240
International style: 50 ~ 210
5.
FHR1 Mark
The trace marked with “FHR1” is the FHR1 trace.
6.
FHR2 Mark
The trace marked with “FHR2” is the FHR2 trace.
7.
Trace
Information List
A list of current date, time, print speed, ID, Name, FHR2 offset, HR,
SpO
2
, NIBP (including SYS and DIA) and TEMP is printed at the start
of the monitoring and every ten minutes afterwards.
8.
Smart Note
The annotation of the event mark below.
9.
HR Mark
The trace marked with “HR” is the maternal HR trace.
(1)
(2)
(3)
(7)
(8)
(9)
(10)
(11)
(12)
(13)
(4)
(5)
(6)
(14)