EDAN F6 User manual - Chapter 2 Installation Guide

F9, F9 Express Fetal & Maternal Monitor User Manual                          Installation Guide 

- 15 - 

Chapter 2 Installation Guide 

NOTE: 

Installation must be carried out by qualified personnel authorized by the manufacturer. 

2.1 Opening and Checking Package 

Visually examine the package prior to unpacking. If any signs of mishandling or damage are 

detected, contact the carrier to claim for damage. 

Open the package; take out the monitor and accessories carefully. Keep the package for possible 

future transportation or storage. Check the components according to the packing list. 

Check for any mechanical damage. 

Check all the cables and accessories. 

If there is any problem, contact us or your local distributor immediately. 

2.2 Installing Battery 

WARNING

Switch off the monitor and unplug it before installing or removing the battery. 

If your monitor has been configured with a rechargeable lithium-ion battery, follow these steps to 

install the battery: 

(1) Battery Installation 

1)  Carefully place the monitor upside down on a flat surface covered with cloth or other type of 

protecting pad. 

2)  Remove the screws of the battery compartment using a cross-head screw driver. Remove the 

battery compartment cover.