EDAN F6 User manual - 6.4 Adjusting Screen Angle

F Series Fetal & Maternal Monitor User Manual                       Pre-Monitoring Preparation 

- 48 - 

If the monitor does not print the baseline, switch on the Print Self-Check function and then 

restart the monitor. 

NOTE:

Make sure the paper is correctly loaded before the printing starts. 

6.4 Adjusting Screen Angle 

The angle between the screen and the top cover of the monitor is adjustable as needed, allowing it 

to be mounted on a wall or placed on a flat surface. 

Adjustment method: 

Push the hook on top of the screen left to spring it open. Pull the screen forward to adjust to one 

of the preset screen angles. 

To bring the screen back to flat, pull it all the way forward and then push it back.