EDAN F6 User manual - 11.5 Patient Application

F9, F9 Express Fetal & Maternal Monitor User Manual                            FTS-3 Fetal Telemetry System 

- 126 - 

7.  Touch the measuring area of the TOCO transducer gently: 

x  The fetal monitor displays TOCO value change. 

8.  Install the US transducer to charge: 

x  The US transducer screen displays charging interface and charging state. 

x  The US transducer indicator is off. 

x  The fetal monitor screen is no display. 

9.  Install the TOCO transducer to charge: 

x  The TOCO transducer screen displays charging interface and charging state. 

x  The TOCO transducer indicator is off. 

x  The fetal monitor screen is no display. 

10.  It takes about 3.5 hours to charge the US transducer and TOCO transducer. 

11.5 Patient Application 

11.5.1 General Application 

Take out the US transducer from the docking slot and it will power on automatically. The 

transducer screen displays the signal strength, battery level and working channel. After the 

transducer is successfully connected to the base station, it will also display the transducer type. 

The indicators are yellow and blue. 

NOTE:

1.  Fix the US transducer and TOCO transducer tightly to ensure that they will not 

shift during movement. 

2.  It is recommended that the transducer should be placed when the patient stands 

for better monitoring. 

3.  Excessive coupling gel may slide the transducer. 

4.  Instruct the patient to move in the prescriptive area and distance for obtaining 

better signal. 

WARNING

If the patient is monitored underwater, please place the transducer when she is ready.

11.5.2 US Transducer 

Apply the coupling gel to the transducer: 

x  Underwater monitoring requires less coupling gel or no coupling gel. 

x  Move the transducer to get the desire fetal heart and belt it to the belly. 

NOTE:

1.  When applied to the patient, the wireless ultrasound transducer may warm slightly