EDAN F6 User manual - 13.3 Disinfecting

F Series Fetal & Maternal Monitor User Manual                        Maintenance and Cleaning 

- 135 - 

CAUTION

1  Do not squeeze the rubber tube on the cuff. 

2  Do not dry-clean the cuff. 

3  Only clean the outer surface of the connectors, make sure no liquid goes into the 

connector. 

4  When the reusable cuff is not connected with the monitor, or being cleaned, always 

place the cover on the rubber tube to avoid liquid permeation. 

13.3 Disinfecting 

To disinfect the transducers and leads, follow these steps: 

1)  Clean the accessories. 

2)  Wipe them with a soft cloth dampened in the recommended disinfectant. 

3)  Wipe them clean with a soft cloth dampened in water. 

4)  Air-dry them or wipe the remaining moisture with a soft dry cloth. 

The table below lists the allowed disinfectant bases:   

Type Recommended 

Fetal/Maternal Monitor 

Ethanol 75% 

Isopropanol 70% 

Ethanol 75% 

Isopropanol 70% 

Base Station 

US and TOCO Transducers 

(the wired and wireless) 

Remote Event Marker 

DECG Cable 

IUP Cable 

ECG Leads 

SpO

2 

Transducer 

TEMP Transducer 

NIBP Cuff   

NIBP Cuff Extension Tube