EDAN F6 User manual - 7.8 *start Monitoring

F Series Fetal & Maternal Monitor User Manual                                 Fetal Monitoring 

- 71 - 

7.8 *Start Monitoring 

After the START key is pressed, the monitor automatically zeroes the pressure, clears the MFM 

count and starts monitoring. 

If the Auto Printing is disabled, press the PRINT key to start printing. 

7.9 *Inputting Maternal Information (Mat. Info) 

7.9.1 Auto ID 

After you press the START key, the system creates an auto-ID for the present patient. (if Mat. 

Info inputting is switched off.) The auto-ID consists of the date and time when the monitoring 

starts. 

7.9.2 Changing Maternal Information 

You can change the patient’s information after the monitoring starts:   

1 Select Mat. Info key 

  on the main interface. 

Figure 7-14 Mat. Info Inputting Menu 

2 Select ID. 

Figure 7-15 Soft Keyboard 

3 Select the required character for patient’s ID on the soft keyboard. 

4 Select Enter. 

5 Select Name. 

6 Select the required letter for patient’s name on the soft keyboard. 

7 Select Enter. 

8 Select OK.