La Marzocco strada ep Operating Manual - page 30
EN
30
Display
Operating Procedure
Description
When the espresso machine is turned on, press and hold
the Encoder Knob.
After about 10 seconds the following
screen is displayed.
Releasing the Encoder Knob the following display appears.
Press the Encoder Knob until the following display appears.
Rotate the Encoder Knob to set the desired temperature, press the Encoder Knob to confirm the value. Continue with
the programming of the other parameters.
To exit the programming mode, scroll the menu, using the the Encoder Knob.
• This parameter allows the operator to
program the coffee boiler temperature.
Each group can have a different
programming.
“Barista” Programming
Temperatures
programming
117.6
°C 00:00
0.8 B
Coffee Boiler
1
2
3
4
Coffee Boiler 1
95.0
°C 98.0°C
Coffee Boiler
1
95.0
°C 98.0°C
117.6
°C 00:00
0.8 B
Coffee Boiler 1
ENABLED
5
THE STEAM BOILER CONTAINS WATER AT ELEVATED TEMPERATURES. WATER
TEMPERATURE OVER 52°C CAN CAUSE SEVERE BURNS INSTANTLY OR DEATH
FROM SCALDING.
DANGER