La Marzocco strada ep Operating Manual - page 42
EN
42
Display
Operating Procedure
Description
When the espresso machine is turned off, press and hold
the Encoder Knob.
After about 10 seconds the following
screen is displayed.
Releasing the Encoder Knob the following display appears.
Press the Encoder Knob until the following display appears.
This parameter is used to set the ratio between water and time necessary for the calculation of the replacement of the
water filter.
To exit the programming mode, scroll the menu, using the the Encoder Knob.
• This parameter allows the technician to
set the value that will enable the espresso
machine to calculate the consumption of
the litres for the replacement of the water
filter.
“Technical” Programming
OFF 00:00
Technical
OFF 00:00
Water Flow cc/sec
1
2
3
4
Water Flow
00 cc/sec
Water Flow
00 cc/sec
OFF 00:00
Language
ENGLISH
5